Continue slapping the clay, using tool #3. Rotate the model in one hand while using the tool to paddle the clay into a more elongated shape.

Use tool #3 to flatten one side of the clay form. Alternately, thump model gently on the table until the side is sufficiently flattened. (See photo on right)

Spray the model with water, then use the palms of your hands to smooth the surface. Examine the surface under an angled light to check for irregularities. If you notice any, use tool #2 to scrape the surface smooth, and fill in any hollows. Moisten the surface again and use palms for the final smoothing.

Now using tool #4, slice the model lengthwise. Don't cut through the flattened "bottom."

Wrap the two pieces in the plastic produce bag, and set aside where they won't get damaged.

Next: Mold Box Floor >>

Ocarina Mold-Tools 1 | Making the Clay Model 2 3 | Mold Box Floor 4 5 | Mold Box Walls 6 7 | Mixing, Pouring, and Finishing 8 | Make an Ocarina with a Plaster Mold | Clay Ocarina Mold | Make an Ocarina using a Clay Mold | Make an Ocarina Without a Mold | Glaze a Ceramic Ocarina | Glaze a Dragon Ocarina